Make that unattractive hole in your door or house look a little better with this DIY overhang.
As those of you who own pets know, a pet door is a utilitarian solution. It solves the problem of pet access while creating an unattractive opening in a door or the side of your house. My friend Tom and I were studying such a pet door recently when we developed the fix you see here (mostly Tom’s idea). It not only improves the look of the entry, but shields it slightly in rainy weather. Your pet might also find a little shade under it in hot weather. The Bending Machine
This little shed roof is easy to make. You can mount it on the sides of the opening so it doesn’t interfere with your dog or cat getting in or out. And because it’s screwed to the opening itself, you don’t have to worry about attaching it to the house’s siding, which could leave entry points for water. Any weather-resistant material will do; we used scrap of some T1-11 siding and PVC exterior wood trim. Here’s how to go about making one.
To begin construction, use cardboard from a discarded box to cut out a template as shown. This will guide you in cutting out the sides and determines the roof slope. It’s an added grace note if the slope of the roof corresponds to that of the house’s roof, but your pet won’t care. Once the template fits the opening, trace it on one piece of siding material. Double up the siding to cut both pieces at the same time.
The interior of the pet door opening here was cased in construction lumber, but yours may be more nicely finished. If so, you can skip this step; otherwise, trim it out with some scrap pieces of PVC attached with 2-inch, 18-gauge stainless-steel exterior brad nails. Likewise, if your pet door has exterior wood trim that’s in good shape, you can leave it alone. If it doesn’t, remove it—as we did in the case of this pet door—and replace it with PVC for a neatly trimmed opening, inside and out.
Next, we used 2-inch exterior wood screws to attach the sides we had cut out earlier. We simply screwed the sides through the PVC trim and into the lumber that framed the opening. We cut the roof out of T1-11 and used a little construction adhesive and plentiful 18-gauge nails to attach the roof to the sides.
The roof over the pet door adds a finishing touch to the opening, converting it from a hole in the side of your house to an entry that has received nearly as much care as any other door.
Roy Berendsohn has worked for more than 25 years at Popular Mechanics, where he has written on carpentry, masonry, painting, plumbing, electrical, woodworking, blacksmithing, welding, lawn care, chainsaw use, and outdoor power equipment. When he’s not working on his own house, he volunteers with Sovereign Grace Church doing home repair for families in rural, suburban and urban locations throughout central and southern New Jersey.
The Best Builds We Saw at SEMA 2022
How to Make a Simple, DIY Wireless Fast Charger
Ukraine Attacks Russian Fleet with Robo-Ships
The AnkerMake M5 3D Printer Is Fast And Easy
Navy Jet Returns to Fleet After Midair Collision
How to Use Locking Pliers
The Corded Dremel Is (Still) The Best Rotary Tool
How to Use a Map and Compass
The Quest for Mach 2: Can We Go Hypersonic Again?
The Inside Scoop on American Tanks
The Great 21st-Century Bomber Race Is On
A Look Back at Atari’s Tumultuous 50 Years
A Part of Hearst Digital Media
Gear-obsessed editors choose every product we review. We may earn commission if you buy from a link.
71 Series Staples ©Hearst Magazine Media, Inc. All Rights Reserved.